Voltcheck, Receiver battery monitor
Voltcheck is on board voltage monitor for receiver
battery. It works switching power switch on the model and displays present
voltage level. No more hessel for charging.
Features
Suitable for 4.8 V and 6.0 V
Voltcheck is suitable for 4.8 V
(4 cell pack) and 6.0 V (5 cell pack). Pressing button behind Voltcheck
twice changes voltage setting. (4 LEDs ON for 4.8 V and 5 LEDs ON for
6.0 V)
Low voltage warning
The LEDs on Voltcheck are gradually off according to current drain and
finally 2 red LEDs are blinking at low voltage.
WARNING : The receiver battery should be charged before
low voltage warning if there are many heavy duty servos in a model.
blue |
green |
green |
green |
green |
red |
red |
|
4.8 V (4 cells) |
5.3 V |
5.1 V |
4.9 V |
4.7 V |
4.5 V |
4.4 V |
4.4 V |
6.0 V (5 cells) |
6.7 V |
6.4 V |
6.1 V |
5.8 V |
5.5 V |
5.4 V |
5.4 V |
| Specification | |
| Voltage range | 4.8 V (4 cells), 6.0 V (5 cells) |
| Current drain | 55 mA (full 7 LEDs on), 4.7 mA (2 red LEDs on) |
| Size | 44.5 X 21 X 10 mm (1.75" X 0.83" X 0.39") |
| Weight | 4.5 g (0.16 oz) |
